IC.4 Digital Tools: Rhino » Bhavya Vora http://legacy.iaacblog.com/maa2011-2012-digitaltools Master in Advanced Architecture 2011/2012 Sun, 08 Jan 2012 18:18:30 +0000 en-US hourly 1 milling tutorials – group 14 http://legacy.iaacblog.com/maa2011-2012-digitaltools/2011/12/milling-tutorials-group-14/ http://legacy.iaacblog.com/maa2011-2012-digitaltools/2011/12/milling-tutorials-group-14/#comments Fri, 23 Dec 2011 23:00:39 +0000 bhavya.vora http://legacy.iaacblog.com/maa2011-2012-digitaltools/?p=486

Concept:

- Our inspiration for this idea came from biology, in specific, the undulating surface of scaled fish skin.

- The geometry for the panel breaks from the repetitive nature of real fish scales by introducing a point of distortion.

- The strategies used to achieve this effect were parallel and radial paths.

- The radial strategy emphasizes this point of distortion by breaking the ordered linearity achieved through the parallel strategy.

- In order to achieve the desired undulating form that we were after, we considered and utilized the maximum depth that we could mill.

d_01 - Copy 1-assigning layers 2-heightfield from image 3-controlls for the image 4-result not satisfactory 5-good results 6-moving the new surface in position 7-boolean diff 8-scales pattern 9-creating a box stock-setting the location and the size of the stock 10-horizontal roughing 11-creating the tool-26 dia ball mill for horizontal roughing 12-computing the tool path 13-simulation 14-selection parallel finish 15-selecting smaller tool-12 dia ballmill for parallel finish 16- simulation for parallel finishing 17-simulation 2 18-final product 19-texture obtained with parallel finish 20-selecting radial finish 21-modifying parameters for radial finising 22-setting tool entry exit parameters 23-final texture after radial finishing 24-final product 25-simulation in progress ]]> http://legacy.iaacblog.com/maa2011-2012-digitaltools/2011/12/milling-tutorials-group-14/feed/ 0