The idea of our system was to create a repetitive movement for semi-spheral modules that are tuning 360 degrees around x axes. Each sphere consists of 4 fiberglass ropes that act like an engine for the neighborhood module, the structure is put into motion only by moving 1 element.

Due to repetive parts the structure has possibility of endless connection and continious movement.

We used fiberglass ropes for connection to 3d printed joints. Some of them were fixed in a middle of ropes to catch/push neighbor unit of structure and rotate it.

We used 5 different kind of static  joints, but after assembling them we created dynamic structure. As the base for the whole system served the board 600×600 mm.

Group 21: Sviatlana Matushko, Maria Czajczynska, Jose Roberto Diaz Braga