Category Archives: Phases

Material Matters – digital tectonics

student team: Martin Firera, Julian Hildebrand, Ohad Meyuhas, Jordi Portell

teaching staff: Marta Male-Alemany, Victor Viña, Brian Peters

Our project “material networks” is based upon the investigation of a multimaterial building processes with the aim of being able to generate material networks which depending  on environmental factors on site such as heat, light, wind may feature specialized physical properties according to  the quantity and deposition of the single materials in the network. The deposition process is based on a piling principle. The project is still progressing,meanwhile some of the accomplished tasks and stages of the project are illustrated below.

test in variation of deposition sequence

manual deposition test with colored sand; creation of vertical and overlapping partitions between piles depending on tempism during deposition process. If piles are generated consecutively piles overlap each other, if deposition happens at the same time the a close to vertical separation between piles emerges.

machinic material deposition setup; colored sand has been poured from three nozzles contemporaneously.

we expected to see purely vertical partitions emerging during contemporaneous deposition of piles; instead due to imprecision inthe deposition process we had clearly blurred areas between two piles

testing realtion of quantity of water and layer thickness during hardening process with cement

machinic control of deposition with new nozzle

In order to organize the deposition of multiple materials machinically we created a nozzle prototype which can be filled with custom plastic bottles containing sand, cement or any other granular material sort. This nozzle can be connected to the shopbot at Iaac, a 3-axis milling machine which during the development of a separate machine can serve for first experiments in material deposition. Switch of scale

for further information please download our  “midterm presentation” pdf

click here for short documentation movies of material tests

Also posted in 1, Material Matters, Team 1, Teams | Comments closed

Hacking Devices – digital tectonics

student team: Martin Firera, Julian Hildebrand, Ohad Meyuhas, Jordi Portell

teaching staff: Marta Male-Alemany, Victor Viña, Brian Peters

the “light detector” is the outcome of the workshop in digital tectonics  2011 at Iaac . By taking apart a basic printer and reusing its motors in combination with some laser cut MDF parts and a microcontroller we finally succeeded in transforming the old printer into a light mapping device which could both map light intensity and localize areas of equal light intensities in a radial diagram.

for further information please download our “hacking devices” pdf

to see the “light detector” in action, please click here

Also posted in 1, Hacking Devices, Team 1, Teams | Comments closed

sandBOToxing

MAA 2010-11
Digital Tectonics
Marta Male Alemany, Victor Vina, Brian Peters
Students: Ayber Gülfer_Antonio Atripaldi_Mani Khosrovani_Andrés Briceño Gutiérrez

The idea to inject a fluid material to build underground structures like docks or pilotis in dunes is not new in architecture or engineering fields. This techniques using sand within a frame of a static and a rigid casting process where the way to inject the material is just to fill a hole drilled before.

We think that we can innovate injecting a fluid and structural material into sand using capillarity as a parameter to emerge a potential new geometry. Our intuitions are related to use sand as a medium to generate  this new geometry instead of a cast.
From a theoretical point of view, the specific material behavior injected is directly related with the sand capacity to absorb it by capillarity. This phenomenon in physic is called as sorptivity.

Through this, we think that we can generate an emergent geometry controlling the specificity of this phenomenon.

At this moment we know by facts that the best idea to inject into sand is to build a machine with a very thin nozzle in order to avoid the natural pressure of sand through the process of dig and do not waste energy.  In the same terms, use a low viscosity material is fundamental to achieve a sustainable process.

According to this, the  parameters of time_speed of the injection, angle of the nozzle and the viscosity of the material are the most relevant data that we need to provide the machine in order to control the potential emergent tectonic through computation.

 http://www.youtube.com/watch?v=a_KX-eO9i8I&feature=youtube_gdata

Pres_DT_MidTerm

Also posted in 1, Material Matters, Team 4 | Comments closed

Color Detector Machine

MAA 2010-11
Digital Tectonics
Marta Male Alemany, Victor Vina, Brian Peters
Students: Ayber Gülfer_Antonio Atripaldi_Mani Khosrovani_Andrés Briceño Gutiérrez
Our first thought was how to use the movement as a source of information and interaction with a machine.
We decided to use a color as a source of interaction and real data creating an image of this stimulus on a physical result.
The idea was to hack a printer and a CD writer to achieve 3 axis of movement.

Basically, the machine works with 4 main steps: IMPUT_color stimulus,  CAMERA-Screen_to identify the movement, PROCESS the information and RESPONSE on a physical result. This physical result was an expression of the movement stimulus with allows us to use this machine to create different patterns of expression.

pres_machine_040211_pdf

Digital Tectonics_Color Detector Machine VIDEO

Also posted in 1, Hacking Devices, Team 4 | Comments closed

Videos and Presentation

Here is the full presentation in pdf format:

http://issuu.com/chryssa-d/docs/areana_presentation_1

Here are videos of the fabrication process:

http://www.youtube.com/watch?v=Q0IuIOuiTwY

http://www.youtube.com/watch?v=jXqja-057ug

Also posted in Material Matters | Comments closed