Master in Advanced Architecture 2011/2012
Performance Horizontal Roughing was important to be done prior to the 3-axis Projection Pocketing in order to save time. The whole process in total took 1 hour. 3D milling – Process consisted of two phases: First phase: horizontal roughing Tool: BallMill 26mm in diameter Dimensions of the board: 600 by 400mm Boards of 8mm thickness [...]
Digital Fabrication final output ::: Lamp Material We were assigned the bending technique using Paper/Cardboard. In our preliminary 3d model manual sketching we used 80g/sqm A4 sized papers. We wanted to design a lamp that is composed of several small units that interlocks and curves in more than one direction. We finally arrived to 0.6mm [...]