Category Archives: Anna Popova

3d Printing – Group 17

By Anya | Published: January 5, 2012
Concept
Motion was the main theme in the printed object, and aim to create a dynamic representation of the space. The idea was inspired from the mechanical (reciprocating) engines and the sequential movement between engine parts (cylinders and rods). The object consists of five joints, two different types, and ten steel rods. Moving one of the rods will cause the middle cylinder to rotate and to move the whole system.

Descriptions :
Type 1
• 3 pieces; one cylinder 18mm, two connecters one each side, two cylinders 12mm.
• 36 mm width.
• 30.6 mm height.
• 12 mm movement range.
Type 2
• 3 pieces; one cylinder 18mm, one connector one slot, two cylinders one with connector one with slot 12mm.
• 40 mm width.
• 30.6 mm height.
• 16 mm movement range.

Presentation (PDF)

Also posted in 3d printing, Ahmad Derhalli, IC.1 Digital Fabrication, Shruthi Basappa, Uncategorized | Comments closed

Valchromat Milling – Group 17

By Anya | Published: January 5, 2012
Concept
The idea was to create a geometrical pattern which can change and be perceived as a different volume from different angles. Leonardo da Vinci drawings were our inspiration. The object consists of 50 mm cubes and in each row the cube touches the adjacent cube in its corner (intersection point) and they have one parallel continuous diagonal line for the whole row. The rest of the rows are the same but it is shifted half the diagonal length to one side to intersect the cubes corners with the previous row intersection points.

Milling strategies
• 2 Axis engraving milling.
• 12mm radius tool.
• Maximum depth reached was 22mm.
• Process took 40 min to finish.

Presentation (PDF)

Also posted in Ahmad Derhalli, IC.1 Digital Fabrication, Milling, Shruthi Basappa | Comments closed

Laser Cut Lamp – Group 17

By Anya | Published: January 5, 2012

DIGITAL FABRICATION – LAMP – RIBBING

Specifications
Technique : ribbing
Material: methacrylate
Thickness : 3 mm

Design process
To articulate ribbing as an inverse technique as opposed to outward expression.
To attain fluid forms within a rigid geometry

Joinery detail
-insertion
-grooves and notches

The following were our observations:

Material
1. During the laser process, there is loss of material.
2. Loss of material varies with the speed and power used to laser.
3. The size of the sheet also affects the laser process with larger sheets prone to bulging.

Laser cutter machine
1. The slc gave us well cut, clean edged members, along with crisp engraving.
2. The blc settings were harder to control, with the engraving and cutting resulting in cracked edges and murky details despite varying speeds and power settings.

Technique
1. For a 3 mm thick sheet, a groove of 2.8 mm was the snuggest.
2. The methacrylate sheet is not flexible and is prone to cracking and splitting, more so if it is forced into a groove of a smaller size.

Presentation (PDF)

Also posted in Ahmad Derhalli, IC.1 Digital Fabrication, Laser cutting, ribbing, Shruthi Basappa | Comments closed

Fabrication

By ahmed.derhalli | Published: September 7, 2011

Conceptual Development:

The Fibonacci sequence formed the basis of the design. The ratio was maintained while trying to achieve a harmonious form.

Project Concept:

The idea was to create a geometrical pattern which can change and be perceived as a different volume from different angles. Leonardo da Vinci drawings were our inspiration. The object consists of 50 mm cubes and in each row the cube touches the adjacent cube in its corner (intersection point) and they have one parallel continuous diagonal line for the whole row. The rest of the rows are the same but it is shifted half the diagonal length to one side to intersect the cubes corners with the previous row intersection points.

Project Concept:

Motion was the main theme in the printed object, and aim to create a dynamic representation of the space. The idea was inspired from the mechanical (reciprocating) engines and the sequential movement between engine parts (cylinders and rods). The object consists of five joints, two different types, and ten steel rods. Moving one of the rods will cause the middle cylinder to rotate and to move the whole system.

Also posted in 3d printing, Ahmad Derhalli, IC.1 Digital Fabrication, Laser cutting, Milling, Shruthi Basappa | Leave a comment