Master in Advanced Architecture 2011/2012
The concept behind this investigation was to design a joint that was capable of a number of different motions; rolling, rotation, and expanding. These motions are further articulated when these individual units are connected to create a linear system. Each unit has a rotation limit of 355 degrees, which creates an interesting spiral effect once [...]
Project description: The geometry of Valchromat panel is generated in order to experiment with the CNC Milling Machine. The aim is to define the CNC milling machine as form-generator. The result should be quick and easy. The starting point was to establish borders in the XY-plane to then extrude the area in the plane z. [...]
Concept: The concept of the joint was conceived to generate different features in a single element instead of just having a simple joint. We try to play with speculation and with these criteria we are looking for unpredictable results. The joint features promote the application of different types of rotation and movement in 3 axes. [...]
We wanted to create a set of joints that would allow our structure to expand and shrink, move in every axis and in the same time be able to connect with another module so it can be populated and create a dynamic surface. The geometry we used is based on two hexagons, one nested into [...]
In this milling exercise we tried to create a panel that would show the contradiction between a smooth surface and a more machine made- industrial set of drilled points. We used a surface as the starting point and on it we traced a set of irregular curves that went through only the first layer of [...]