METAmorphosis

The Metamorphosis project is a series of geometrical moments obtained by stretching an assemblage of arched rods. There are 3 types of 3D-printed joints: the base joint (B) fixes the structure to the board, the “plug” joint (A) slots in and twist-locks into the base joint, and the ”slider” (C) connects and moves along two adjacent rods. The geometrical moments can be created by changing the position of the plug joint in the board, or also by moving the base joint into the laser-cut holes. The chosen arrangement either expands or contracts the shape of the metamorphosing caterpillar whilst the slider deforms the body in various axes. Finally, the addition of a hinge in the board allows for the compression of the structure at an different angles. Combining 3 different strategies, the object (or parts of it) can be stretched compressed and twisted into an infinite number of geometries.

Link to video!: https://vimeo.com/80303741

Meta-blog 1

Meta-blog 2

Meta-blog 5

Meta-blog 4

Meta-blog 3

Joints_A.B.CJoints_A.B

 

 

 

This entry was posted in Alessio Salvatore Verdolino, Mardet Gebreyesus, Ramin Shambayati. Bookmark the permalink. Comments are closed, but you can leave a trackback: Trackback URL.